Customized Size Cement plan grinding steel balls with Low Broken Rate B2 B3 60MN 65MN manufacturer from China Oriental Casting and Forging Co., Ltd.

Customized Size Cement plan grinding steel balls with Low Broken Rate

Place of Origin:

Shandong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: B2 B3 60MN 65MN

Good quality all size Low Broken Ra

Good quality all size Low Broken Rate Steel Grinding Balls

In the fierce market competition,we relying on advanced production equipment, perfect detection

technology,standard casting process, innovative heat treatment experience and scientific testing means,

an accurate analysis of the chemical composition, so that wear resistance of our products is good,

broken rate is low, in 2007 the scientific management successfully passed the ISO9001 quality

system certificate and ISO14000 environment system certification.

Breif Description:
Size: 20-150mm Inspection: SGS/BV/TUV
Origin: Shandong Province, China

Material	Chemical Elements
Material	C	Si	Mn	P/S	Cr	Hardness (HRC)
45#	0.42-0.50	0.17-0.37	0.5-0.8	<0.035	<0.25	60-65
60MN	0.55-0.65	0.17-0.37	0.7-1.0	<0.04	<0.25	58-63
B2	0.72-0.85	0.17-0.37	0.7-1.0	<0.04	0.4-0.6	55-58
B3	0.5-0.8	1.0-1.8	0.4-1.0	0.035	0.5-1.0	56-63

1.Feature:

1) High Hardness: The surface hardness of forged and rolling balls is to 60-65 HRC and volume hardness is to 60-63 HRC

2) High Impact Toughness: The impact toughness is more than 12 J/cm2;

3) Low Broken Rate: The actual broken rate is not higher than 1%;

4) Even Wear-resistance: The loss of ball round rate is 50-300 g/ton.

2.The production process of the forged grinding balls
1). Raw material:
All the material is qualified with certificate and made in the Chinese largest steel production enterprise.
2). Different steel specifications ccording to the clients's requirements.
Main Steel Material :C45 Steel;60Mn Steel;B2 Steel
3). Steel Cutting:
the steel bars should be cut into small pieces according to the size of steel balls required by the order.
4). Heating:
we use the electric furnace instead of the traditional coal stove, the biggest advantage is that all the steel bars can accept the most approriate temperature during the heating progress. It affect the hardness and toughness directly.
5). Hammer forging:
The raw material is forged to a certain deformation by the air hammer, when the compression ratio increased, the micro-structure become more compact so that the hardness and the toughness can be improved.
6). Heat treatment:
Both the water quenching heat treatment production line and our own temperature control technics are important.
We have mature production technicians responsible for the heat treatment process as we know this process affect the grinding balls performance directly.
7). Quality Control.
Raw material test before production
Hardness test Drop Test Impact Test Core pulling Test after production
SGS test before delivery
Certificate: ISO 9001:2008